-------------------- 1 --------------------
#1. Oil Sump - from lee.leslie@firstunion.com
Top
Date: Fri, 27 Oct 2000 10:26:25 -0400 From: lee.leslie@firstunion.com Subject: Oil Sump I've been using an oil sump on the wife's cars for a few months now & love how easy it is... I use an electric one that hooks up to the battery & sucks it righ out of the dipstick (takes about 1 minute from start to finish) & into a 6 gal jerry jug that makes for easy transportation to the recycling center & since it is yellow, the wife rarely accidently mistakens it for gas when filling the mower.. My question, for those of you who use these... do you feel like you get all the oil out? Do you have a technique? I feel like it only gets 3/4 of it out.. TIA, Lee 97' M3/4 32K
-------------------- 2 --------------------
#2. How to remove foglights? - from eugene han
Top
Date: Fri, 27 Oct 2000 11:40:13 -0500 From: "eugene han" <gene501@hotmail.com> Subject: How to remove foglights? Can anyone point me to a weblink that explains how to get the lights off?? Instructions would be appreciated too.
-------------------- 3 --------------------
#3. Nut size and bolt required for the changer bracket?? - from Robert_Manger@mastercard.com
Top
Date: Fri, 27 Oct 2000 14:19:30 -0400 From: Robert_Manger@mastercard.com Subject: Nut size and bolt required for the changer bracket?? Happy Friday everyone, Well the power of the list has bestowed a CD changer braket and now all I need to seal the deal on the install is some misc nuts and bolts for the thing. I am looking for the nut size for the bolts that are above the battery tray and the one bolt that screws into the package shelf. as always thank you for any and all help. Rob 95 M3 with new CD changer. yeah buddy
-------------------- 4 --------------------
#4. Re: [E36M3] Nut size and bolt required for the changer bracket?? - from Andrej Dolenc
Top
Date: Fri, 27 Oct 2000 14:35:17 -0500 From: Andrej Dolenc <adolenc@erols.com> Subject: Re: [E36M3] Nut size and bolt required for the changer bracket?? > Happy Friday everyone, TGIF! > Well the power of the list has bestowed a CD changer braket and now all I need > to seal the deal on the install is some misc nuts and bolts for the thing. I am > looking for the nut size for the bolts that are above the battery tray and the > one bolt that screws into the package shelf. On my '97 M3, the bolts above the battery tray were 10mm. Had to dig thru 3 hardware stores to find 10mm nuts. The parcel shelf I just took some old nut and bolt that fit thru the hole in the parcel shelf. Andrej '97 M3
-------------------- 5 --------------------
#5. WTB Two (2) M-Contour II 17"x8.5" - from Heckendorf, David
Top
Date: Fri, 27 Oct 2000 16:46:11 -0400 From: "Heckendorf, David" <DHeckendorf@broadband.att.com> Subject: WTB Two (2) M-Contour II 17"x8.5" Yeah, I know, get in line... But on the outside chance that someone has theirs lying around and wants to get some $$ for them... I don't need them to have usable tread on the tires (if they even have tires) as I'll be getting four new ones once I get these two rims... Thx, Dave
-------------------- 6 --------------------
#6. HVAC Control Lights Gone. - from F. Graziano
Top
Date: Fri, 27 Oct 2000 18:52:12 -0700 From: "F. Graziano" <fgraziano@monmouth.com> Subject: HVAC Control Lights Gone. I believe the subject states it all. Anyone else have this problem? T-Shooting tips? Things to look for? Thanks, Frank
-------------------- 7 --------------------
#7. Re: [E36M3] HVAC Control Lights Gone. - from Jim Powell
Top
Date: Fri, 27 Oct 2000 15:55:08 -0700 From: Jim Powell <jsp98m3@home.com> Subject: Re: [E36M3] HVAC Control Lights Gone. It would help if you indicated which model year you have since the systems are different over the years. So..... Do you have the dial or digital type? And with that, I'm off for the weekend. Hasta! Jim "F. Graziano" wrote: > Date: Fri, 27 Oct 2000 18:52:12 -0700 > From: "F. Graziano" <fgraziano@monmouth.com> > Subject: HVAC Control Lights Gone. > > I believe the subject states it all. Anyone else have this problem? > T-Shooting tips? Things to look for? > Thanks, > Frank > > > ************************************************************* > List Commands > UNSUBSCRIBE - (in subject line) unsubscribes you from the mailing list. > *************************************************************
-------------------- 8 --------------------
#8. Re: [E36M3] HVAC Control Lights Gone. - from F. Graziano
Top
Date: Fri, 27 Oct 2000 21:13:18 -0400 From: "F. Graziano" <fgraziano@monmouth.com> Subject: Re: [E36M3] HVAC Control Lights Gone. Apology to the list for wasting your time. I don't understand it but it seems that by simply writing an email for the solution the lights fixed themselves. Go figure!! Oh well they work now, im only left with the thoughts of what could be wrong??? Thanks, Frank ----- Original Message ----- From: "Jim Powell" <jsp98m3@home.com> To: "E36M3" <e36m3@bmwmpower.com> Sent: Friday, October 27, 2000 7:02 PM Subject: Re: [E36M3] HVAC Control Lights Gone. > Date: Fri, 27 Oct 2000 15:55:08 -0700 > From: Jim Powell <jsp98m3@home.com> > Subject: Re: [E36M3] HVAC Control Lights Gone. > > It would help if you indicated which model year you have since the systems > are different over the years. So..... Do you have the dial or digital > type? And with that, I'm off for the weekend. Hasta! > > Jim > > "F. Graziano" wrote: > > > Date: Fri, 27 Oct 2000 18:52:12 -0700 > > From: "F. Graziano" <fgraziano@monmouth.com> > > Subject: HVAC Control Lights Gone. > > > > I believe the subject states it all. Anyone else have this problem? > > T-Shooting tips? Things to look for? > > Thanks, > > Frank > > > > > > ************************************************************* > > List Commands > > UNSUBSCRIBE - (in subject line) unsubscribes you from the mailing list. > > ************************************************************* > > > ************************************************************* > List Commands > UNSUBSCRIBE - (in subject line) unsubscribes you from the mailing list. > ************************************************************* > > >
-------------------- 9 --------------------
#9. Anyone with an older TMS chip for a 95M3?? - from Bora Akyol
Top
Date: Fri, 27 Oct 2000 19:56:12 -0700 From: Bora Akyol <akyol@pluris.com> Subject: Anyone with an older TMS chip for a 95M3?? Anyone that has an older TMS chip for a 95M3 with an EWS, can you please email me off-list? Bora
-------------------- 10 --------------------
#10. SF Bay Area M3 owner mailing list - from Bora Akyol
Top
Date: Fri, 27 Oct 2000 20:15:12 -0700 From: Bora Akyol <akyol@pluris.com> Subject: SF Bay Area M3 owner mailing list I have created an SF Bay Area M3 owners mailing list thinking that it can be used for event announcement and will contain an archive as well. It can also be used for quick parts requests, etc. To subscribe, go to: http://sfbaym3.listbot.com Bora