-------------------- 1 --------------------
#1. Re: [E36M3] Z3 Rienforcement plate mounting ? - from Chester Wong
Top
Date: Wed, 11 Jul 2001 09:48:06 -0700 (PDT) From: Chester Wong <chester_p_wong@yahoo.com> Subject: Re: [E36M3] Z3 Rienforcement plate mounting ? From bottom up: - Rear shock mount - Sheet metal - Reinforcement plate - Nuts HTH, Chester --- bmw <m3lawdawg@yahoo.com> wrote: > Date: Wed, 11 Jul 2001 09:42:16 -0700 (PDT) > From: bmw <m3lawdawg@yahoo.com> > Subject: Z3 Rienforcement plate mounting ? > > I will be putting these on this weekend, does the > plate go on the underside or top side of the mount. > > Tony > 95M3 > > __________________________________________________ > Do You Yahoo!? > Get personalized email addresses from Yahoo! Mail > http://personal.mail.yahoo.com/ > > > ************************************************************* > List Commands > UNSUBSCRIBE - (in subject line) unsubscribes you from the mailing list. > DIR - sends a listing of files available in the list's GET directory. > GET filename1.ext,filename2.ext - sends the requested file(s). > > To issue a command/request to the server: > Send a message with the command you wish executed as the > subject of the message to the email address e36m3@bmw-m.net. > ************************************************************* > > ===== __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/
-------------------- 2 --------------------
#2. RE: [E36M3] RE:Radio Code - from Luis Veras
Top
Date: Wed, 11 Jul 2001 13:00:24 -0400 From: "Luis Veras" <veras@tricom.net> Subject: RE: [E36M3] RE:Radio Code Actually, each car has a different code. It's supposed to be an anti-thief method. You shouldn't be sending your code to hundreds of people on a mailing list. Also, the code is a 5 digit one, so I think the 4 digit code you suggested isn't correct. > -----Original Message----- > From: Ned Coonen [mailto:ncoonen@hotmail.com] > Sent: Wednesday, July 11, 2001 12:46 PM > To: E36M3 > Subject: [E36M3] RE:Radio Code > > > Date: Wed, 11 Jul 2001 11:23:46 -0500 > From: "Ned Coonen" <ncoonen@hotmail.com> > Subject: RE:Radio Code > > Vince, I have a '98 M3/2 and my radio code is 3362. I think > the code for the > '98 four-door model is 3364. > > Good luck. > > ...ned. > '98 M3 > '88 M5 > > > -------------------- 10 -------------------- > > Date: Wed, 11 Jul 2001 09:01:32 -0500 > > From: Vince Throckmorton <vince@rjthrockmorton.com> > > Subject: RE:Radio Code > > > > Anyone have the code for a 98 AM/FM cassette? I had the > radio out last > > night and my dealer tells me I have to bring it in or pull the radio > > back out and call them with the serial #. > > > > You can e-mail me privately. > > > > THANKS > > > > Vince Throckmorton > > 98 M3-4 > > vince@rjthrockmorton.com > > > ************************************************************* > List Commands > UNSUBSCRIBE - (in subject line) unsubscribes you from the > mailing list. > DIR - sends a listing of files available in the list's GET directory. > GET filename1.ext,filename2.ext - sends the requested file(s). > > To issue a command/request to the server: > Send a message with the command you wish executed as the > subject of the message to the email address e36m3@bmw-m.net. > ************************************************************* > > >
-------------------- 3 --------------------
#3. squeaking sway bars - from Barrett Nicholas
Top
Date: 11 Jul 2001 12:15:16 CDT From: Barrett Nicholas <barrett.nicholas@usa.net> Subject: squeaking sway bars I've actually had a RD Sport sway bar bind up in the bushing and it ended up breaking the mounting bracket, so don't ignore the need to lube (mine didn't squeek). I replaced them with greasable bushings from energy suspensions, they were something like $13. They're not quite a beefy as the RD Sport bushings, but bigger than the stock 325i (what I drive) bushings. hth, Barrett
-------------------- 4 --------------------
#4. WTB strut tower bar - from David Flanary
Top
Date: Wed, 11 Jul 2001 10:34:24 -0700 From: "David Flanary" <dflanary@markhamvineyards.com> Subject: WTB strut tower bar I am looking to buy a strut tower bar and rear shock tower bar for my '99 coupe. Any kind but UUC, which will not fit a '99. Please e-mail me privately if you have one or both. TIA David W. Flanary Markham Vineyards PS Only 10 days till ALMS at Sears Point, Woo-Hooo.
-------------------- 5 --------------------
#5. Brake bleeding procedure ? - from Thomas Salva
Top
Date: Wed, 11 Jul 2001 14:41:53 -0500 From: Thomas Salva <tsalva@ix.netcom.com> Subject: Brake bleeding procedure ? Hello, Can someone point me to the procedure for bleeding the brakes for my '98 M3/4 ? Boiled the brake fluid (stock) and burned through a set of front pads last weekend at MIS, those repeated slow-downs from 135 to 65 every 1 1/2 minutes are a killer. Plan to build Jim P.'s quick & dirty pressure bleeder and replace the fluid with ATE Super Blue. Thomas 98 M3/4 with a few mods
-------------------- 6 --------------------
#6. Shock length help - from Birkhead, Rob
Top
Date: Wed, 11 Jul 2001 11:51:53 -0700 From: "Birkhead, Rob" <rbirkhead@bb.directv.com> Subject: Shock length help Is there someone who can measure the full extended length of the rear shock for an e36 M3? I bought a used set of Koni C/O off of an M coupe and want to see how much I am off in length. I would like to know without taking mine off, so if someone has a set they can use to measure that would be a huge help. Thanks, Rob
-------------------- 7 --------------------
#7. Re: [E36M3] Z3 Rienforcement plate mounting ? - from Rob Jackowitz
Top
Date: Wed, 11 Jul 2001 15:22:18 -0400 From: "Rob Jackowitz" <rjme@msn.com> Subject: Re: [E36M3] Z3 Rienforcement plate mounting ? Is this a worthwhile upgrade? Has anyone else installed this on their car? Rob >Date: Wed, 11 Jul 2001 09:48:06 -0700 (PDT) >From: Chester Wong <chester_p_wong@yahoo.com> >Subject: Re: [E36M3] Z3 Rienforcement plate mounting ? > >From bottom up: > >- Rear shock mount >- Sheet metal >- Reinforcement plate >- Nuts > >HTH, >Chester _________________________________________________________________ Get your FREE download of MSN Explorer at http://explorer.msn.com
-------------------- 8 --------------------
#8. Re: Z3 Rienforcement plate mounting ? - from S Lafredo
Top
Date: Wed, 11 Jul 2001 12:41:55 -0700 (PDT) From: S Lafredo <slafredo@yahoo.com> Subject: Re: Z3 Rienforcement plate mounting ? Well they are cheap enough and they should not cause any harm and 'may' provide some protection. I have had a Dinan RSB since I bought my car. The RSB end caps serve the same purpose as the plates and I could not use both even if I wanted to. --- Rob Jackowitz <rjme@msn.com> wrote: > Is this a worthwhile upgrade? > Has anyone else installed this on their car? __________________________________________________ Do You Yahoo!? Get personalized email addresses from Yahoo! Mail http://personal.mail.yahoo.com/
-------------------- 9 --------------------
#9. Re: Z3 Reinforcement plate mounting ? - from Neil Maller
Top
Date: Wed, 11 Jul 2001 14:48:16 -0500 From: Neil Maller <neil.maller@gte.net> Subject: Re: Z3 Reinforcement plate mounting ? on 7/11/01 11:55 AM, bmw <m3lawdawg@yahoo.com> wrote: > I will be putting these on this weekend, does the > plate go on the underside or top side of the mount. > Tony > 95M3 Top. The rear shock mount itself provides reinforcement underneath. Neil 96 M3
-------------------- 10 --------------------
#10. RE: [E36M3] Fix for squeaking swaybar? - from Jim Bassett
Top
Date: Wed, 11 Jul 2001 12:47:32 -0700 From: Jim Bassett <jbassett@geysernetworks.com> Subject: RE: [E36M3] Fix for squeaking swaybar? > We wrapped the sway bar in Teflon tape at the > sections that > came in contact with the urethane. Then we slathered on that > sticky green > goop that they give you for grease. I'm having a hard time > remembering how > well this actually worked, which is a good sign since I don't > recall being > irritated by squeaky bushings. Anyone else try this? Might work. I did the Teflon wraping thing on my UUC sway bars. Worked for about a year, but I now have some squeaking from the front end, which I assume is from the sway bars (I know, I know... :-)). I have been either too busy or too lazy to take 'em off & re-grease them, so I've just lived with it for now. Jim Bassett 1998 M3/4 - squeak, squeak, squeak