-------------------- 1 --------------------
#1. Re: Schroth Profi II asm ? - from Ned Coonen
Top
Date: Thu, 3 Jan 2002 10:07:55 -0800 From: "Ned Coonen" <ncoonen@hotmail.com> Subject: Re: Schroth Profi II asm ? I had Profi II belts in my E36 M3 for a couple of years. I don't know how the shoulder harnesses could be attached without a rollbar or harness bar. Use Schroth Rallye 4 belts. Check out http://www.hmsmotorsport.com/ or, better yet, call Joe Marko for expert guidance. He is Mr. Schroth in the USA. ....ned. '98 M3 race car '88 M5 *for sale* car > Date: Thu, 3 Jan 2002 22:59:05 -0700 > From: "Rob" <motor@cadvision.com> > Subject: Schroth Profi II asm ? > > Do anyone have a Schroth Profi II (4pt) asm in their E36?. I am looking > at this belt but want to attach it without a roll bar or harness bar, can > this be done?.
-------------------- 2 --------------------
#2. Various spring threads - from VT
Top
Date: Thu, 3 Jan 2002 09:47:48 -0800 (PST) From: VT <fstbmwm3@yahoo.com> Subject: Various spring threads After trying the Lightweight M3, H&R sport and now the H&R race springs I would like to add my 2 euro cent (the eurodollar is here folks !) When shopping for springs all that matters is a) stiffness in lbs per inch b) progressive vs linear design c) height changes. If you dont have an opinion on all three issues, dont bother with the R&R. It costs and you must also get an alignment. Practically all springs that are below 300lbs/inch and are progressive are for Driving Miss Daizy. If you want to upgrade check the stiffness rating of your OEM springs and upgrade to a significantly stiffer spring. I am not talking 800lbs or 1200lbs springs;350-400lbs linear front are OK for street/track and if you have CD changer skipping problems go with 400 progressive springs. Personally I was warned the the H&R race springs was too stiff and had to buy 2 $ets of springs before deciding for myself. If the vendor doesnt have stiffness in lbs for front and rear, dont buy the springs until they provide specs. Otherwise you are getting almost the same springs and wasting good money that could be spend on Driving schools (improving the nut behind the wheel) Regards, Vlasis E36 M3 mutant from Hell __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com
-------------------- 3 --------------------
#3. Is it possible... - from Paul D Agustin
Top
Date: Thu, 03 Jan 2002 12:09:14 -0600 From: Paul D Agustin <agustin@iaxs.net> Subject: Is it possible... Is it possible to have the vehicle startup with out the ASC, or on the E46 DSC disengaged? I want to remember that we discussed this here quite a while back but I can't find it in the archives. TIA Paul
-------------------- 4 --------------------
#4. Re: [E36M3] Replacing Trunk Badge - from Zack Steinkamp
Top
Date: Thu, 3 Jan 2002 10:55:26 -0800 (PST) From: Zack Steinkamp <edsarkiss@yahoo.com> Subject: Re: [E36M3] Replacing Trunk Badge use dental floss to cut through the foam adhesive rather than using a screwdriver! (thanks chester for that one) use your finger to rub off the remaining adhesive, then clean & polish the spot where you used to have the badges. stand back and admire your new smooth trunklid. contemplate why every car has badges, and why owners don't remove them after purchasing the car. further contemplate why so many dealer license plate frames are left on so many cars... ;-) -zs 98 M3/4 with a smooth a$$ end --- Joseph Bachman III <josephbachman@hotmail.com> wrote: > Date: Wed, 02 Jan 2002 20:50:34 +0000 > From: "Joseph Bachman III" <josephbachman@hotmail.com> > Subject: Replacing Trunk Badge > > Speaking of the wonderful faded trunk badges... I just recieved a > new one > in my Christmas stocking (I don't want to know how much the elf paid > the > dealer for that one) and was planning on sticking it on tonight. Any > recomendations? I figured that a flat bladed screwdriver and a towel > for > paint protection would be the recipe. Do I have to worry about the > tape on > the old badge pulling off paint? How well are those puppies stuck on > there? > Should I be heating it with a hairdryer or some other aid? Thanks > again > gang. Hope everyone had a happy new year. > > > Jay Bachman > '99 estoril M3/2 > > _________________________________________________________________ > Send and receive Hotmail on your mobile device: http://mobile.msn.com > > > ************************************************************* > List Commands > UNSUBSCRIBE - (in subject line) unsubscribes you from the mailing > list. > DIR - sends a listing of files available in the list's GET directory. > GET filename1.ext,filename2.ext - sends the requested file(s). > > To issue a command/request to the server: > Send a message with the command you wish executed as the > subject of the message to the email address e36m3@bmw-m.net. > ************************************************************* > > __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com
-------------------- 5 --------------------
#5. FS: Eibachs - from S Lafredo
Top
Date: Thu, 3 Jan 2002 11:06:34 -0800 (PST) From: S Lafredo <slafredo@yahoo.com> Subject: FS: Eibachs For sale: - front and rear E36M3 Eibachs. - front and rear Eibach urthane bushings - Eibach rear sway bar mounting hardware - front BMW 26mm rubber bushings $325 + shipping & boxing. __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com
-------------------- 6 --------------------
#6. FS: JTD ODB - from S Lafredo
Top
Date: Thu, 3 Jan 2002 11:08:04 -0800 (PST) From: S Lafredo <slafredo@yahoo.com> Subject: FS: JTD ODB For sale: - Brand new. JTD Oil Distribution Block w/screw and washers. Highest bid by tommorrow afternoon takes it. __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com
-------------------- 7 --------------------
#7. FS: JTD Underpanel - from S Lafredo
Top
Date: Thu, 3 Jan 2002 11:09:54 -0800 (PST) From: S Lafredo <slafredo@yahoo.com> Subject: FS: JTD Underpanel For sale: - Brand new. JTD Underpanel. $150 w/shipping __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com
-------------------- 8 --------------------
#8. FS: JTD Active Tranny Rings - from S Lafredo
Top
Date: Thu, 3 Jan 2002 11:11:23 -0800 (PST) From: S Lafredo <slafredo@yahoo.com> Subject: FS: JTD Active Tranny Rings For sale: - Brand new. JTD Active Tranny Rings. Highest bidder by tomorrow afternoon takes them. 2 sets. __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com
-------------------- 9 --------------------
#9. FS: E36M3 LTW Wing inserts - from S Lafredo
Top
Date: Thu, 3 Jan 2002 11:13:33 -0800 (PST) From: S Lafredo <slafredo@yahoo.com> Subject: FS: E36M3 LTW Wing inserts For sale: - These are brand new. Never painted. E36M3 LTW wing inserts. BMW parts number stamped on both sides. I will sell these to the highest bidder by tomorrow afternoon. I will NOT take less than $100 for these. Thanks. S __________________________________________________ Do You Yahoo!? Send your FREE holiday greetings online! http://greetings.yahoo.com
-------------------- 10 --------------------
#10.PF97 track pads (used) & possibly track wheels - from jim.bassett@alloptic.com
Top
Date: Thu, 3 Jan 2002 12:31:20 -0800 From: jim.bassett@alloptic.com Subject: <FS> PF97 track pads (used) & possibly track wheels Hi all, Since I've retired the M3 from track duty, I have some PF97 pads I no longer have a use for. - 1 set fronts, 12mm remaining. - 1 set rears, 9-10mm remaining. $100 total for both sets (cash, check, or PayPal accepted). (I also have 2 sets of PF90 fronts with ~5mm remaining that I can throw in as well, if interested. Otherwise they'll get tossed out.) And, I may be selling the track wheels I used on the M3: BBS Moda Sports 17X8 35mm offset. Any interest? Cheers, Jim Bassett 1998 M3/4 1993 325is #44 KP