-------------------- 1 --------------------
#1. Re: [E36M3] Windshield/Aerial Question - from Rob Verenna
Top
Date: Wed, 19 Feb 2003 14:01:26 -0500 From: Rob Verenna <rob@willraceforbeer.com> Subject: Re: [E36M3] Windshield/Aerial Question At Wednesday, 19 February 2003, m3incorp wrote: >I had mine replaced with an aftermarket windshield and it had all >necessary connections. A company named SafeLite did mine. Did the SafeLite glass have the black border like someone else mentioned another aftermarket piece did? I had (my third) chip repaired by them but it was deeper/worse than the previous two and when combined with a huge pothole turned into a crack so once I dig the car out from the snow here, I need to get the glass replaced. I've had them replace windshields on my truck (twice) and they did a decent job, so I will probably have them do the M3... I just want to know if their (presumeably cheaper) glass has the same border or if I'm going to pay for the BMW glass to ensure that it matches.... - rob =================================================================== EASY and FREE access to your email anywhere: http://Mailreader.com/ ===================================================================
-------------------- 2 --------------------
#2. Spacers - from Ahmad Lutfeali
Top
Date: Wed, 19 Feb 2003 19:50:34 +0000 From: "Ahmad Lutfeali" <m3_racer99@hotmail.com> Subject: Spacers Gruppe, Where can I get 10mm spacers for our cars? Thanks in advance, Ahmad 98 M3/2 _________________________________________________________________ MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. http://join.msn.com/?page=features/virus
-------------------- 3 --------------------
#3. Trailing Arm Bushing Tool - from Ahmad Lutfeali
Top
Date: Wed, 19 Feb 2003 19:51:03 +0000 From: "Ahmad Lutfeali" <m3_racer99@hotmail.com> Subject: Trailing Arm Bushing Tool Gruppe, I will be changing the trailing arm bushing next weekend. Someone on the list rents out the tool (for changing them). Any contacts? Info? Thanks again, Ahmad _________________________________________________________________ Tired of spam? Get advanced junk mail protection with MSN 8. http://join.msn.com/?page=features/junkmail
-------------------- 4 --------------------
#4. Spacers - from Ahmad Lutfeali
Top
Date: Wed, 19 Feb 2003 19:45:25 +0000 From: "Ahmad Lutfeali" <m3_racer99@hotmail.com> Subject: Spacers Gruppe, Where can I get 10mm spacers for our cars? Thanks in advance, Ahmad 98 M3/2 _________________________________________________________________ Add photos to your e-mail with MSN 8. Get 2 months FREE*. http://join.msn.com/?page=features/featuredemail
-------------------- 5 --------------------
#5. Re: [E36M3] Spacers - from cteague@cox.net
Top
Date: Wed, 19 Feb 2003 15:21:16 -0500 From: <cteague@cox.net> Subject: Re: [E36M3] Spacers Ahmad, I got mine from Steve D' at www.ultimategarage.com They are hubcentric. Chris > Date: Wed, 19 Feb 2003 19:50:34 +0000 > From: "Ahmad Lutfeali" <m3_racer99@hotmail.com> > Subject: Spacers > Gruppe, > > Where can I get 10mm spacers for our cars? > > Thanks in advance, > > Ahmad > 98 M3/2
-------------------- 6 --------------------
#6. Re: [E36M3] Spacers - from Rex Tener
Top
Date: Wed, 19 Feb 2003 13:44:13 -0800 From: Rex Tener <rex_tener@yahoo.com> Subject: Re: [E36M3] Spacers At 02:03 PM 2/19/2003 -0600, Ahmad Lutfeali wrote: >Where can I get 10mm spacers for our cars? Chris already mentioned Steve D' at the Ultimate Garage. I got one of my sets of H&R hubcentric spacers from Evolution Sports: <http://www.evolutionsports.com> -- Rex Tener rex_tener@yahoo.com
-------------------- 7 --------------------
#7. re: Cracked Windshield - from bs
Top
Date: Wed, 19 Feb 2003 16:52:38 -0500 From: bs <m3bs@comcast.net> Subject: re: Cracked Windshield I had a good experience with Safelite in December. They came to my house and did the repair in my driveway in about 2 hours. No more stone chips, I can see again! > > > Date: Wed, 19 Feb 2003 10:36:15 -0800 (PST) > > From: Junaidi Irwan <cuwei@yahoo.com> > > Subject: Cracked Windshield > > > . My question is: Has anyone ever used SAFELITE to replace your car's windshields?
-------------------- 8 --------------------
#8. Anyone in NE region have a set of scales? - from Geof McLaughlin
Top
Date: Wed, 19 Feb 2003 17:25:40 -0500 From: Geof McLaughlin <gfmiiilist@attbi.com> Subject: Anyone in NE region have a set of scales? Does anyone in the New England region (preferably close to Mansfield, MA) have a set of scales that I could borrow for a weekend or know of a local shop with scales? Thanks. Geof
-------------------- 9 --------------------
#9. Re: [E36M3] Anyone in NE region have a set of scales? - from DocWyte
Top
Date: Wed, 19 Feb 2003 14:43:38 -0800 (PST) From: DocWyte <josh_wyte@yahoo.com> Subject: Re: [E36M3] Anyone in NE region have a set of scales? I assume Turner has a set. I know Shine Racing in walpole has a set. 508-660-7974. -josh --- Geof McLaughlin <gfmiiilist@attbi.com> wrote: > Date: Wed, 19 Feb 2003 17:25:40 -0500 > From: Geof McLaughlin <gfmiiilist@attbi.com> > Subject: Anyone in NE region have a set of scales? > > > Does anyone in the New England region (preferably > close to Mansfield, MA) > have a set of scales that I could borrow for a > weekend or know of a local > shop with scales? > > Thanks. > > Geof > > > > ************************************************* > Please help support the E36M3 list by visiting our > sponsors: > Taylor Autosport http://www.taylorautosport.com > Rogue Engineering http://www.rogueengineering.com > BMW M3 Specialties http://www.jt-designs.com > Bimmerworld http://www.bimmerworld.com > > DIGEST INFORMATION: > http://www.bmw-m.net/resources/digest_info.htm > ************************************************* > > ===== Josh Wyte Momentum Motorsports 508-833-3024 After 5 pm EST __________________________________________________ Do you Yahoo!? Yahoo! Shopping - Send Flowers for Valentine's Day http://shopping.yahoo.com
-------------------- 10 --------------------
#10. Subject: Contour Wheels? - from Mo Karamat
Top
Date: Wed, 19 Feb 2003 18:01:58 -0500 From: Mo Karamat <karamatm@optonline.net> Subject: Subject: Contour Wheels? Bob, They sound like the AT/ATP type 5's. They are replica's made in Italy. Decent quality, but they do bend easier than the OEM's (don't ask me how I know! :) ) If you are looking for another one, I will be selling a 17 X 7.5 soon.. Mo -------------------- 1 -------------------- Date: Sun, 16 Feb 2003 19:55:42 -0500 From: "Nancy Fluharty" <fluhar@worldnet.att.net> Subject: Contour Wheels? Trying to determine if I have the real thing or a replica. My wheels have no BMW stampings or anything that looks like a BMW part number. On the backside are size/offset information, "Kontour," and "Made in Italy." On the front (outside) is a small logo of stylized interlocked letters which might or might not be JWL. Real or pretend? If they are replicas, can anyone comment on their quality? Bob Fluharty 95 M3 87 325is Cincinnati