-------------------- 1 --------------------
#1. brake pads - from Mdriver13@aol.com
Top
Date: Tue, 01 Jul 2003 14:25:21 -0400 From: Mdriver13@aol.com Subject: brake pads Group, Where is the best place to get Axxis brake pads? TIA, Bob Gill 97 ///M3 coupe Philly Region SCCA BSP Champ '01 and '02
-------------------- 2 --------------------
#2. WTB - Drivers side door speaker for 98 Coupe - from Patrick Mallon
Top
Date: Tue, 01 Jul 2003 15:32:39 -0400 From: Patrick Mallon <pmallon@comcast.net> Subject: WTB - Drivers side door speaker for 98 Coupe Anyone out there with a spare drivers door side speaker set for a 98 M3 Coupe? Anyone know of a good place to pick one of these up used/salvaged?
-------------------- 3 --------------------
#3. WTB - Drivers side door speaker for 98 Coupe - from Patrick Mallon
Top
Date: Tue, 01 Jul 2003 15:58:40 -0400 From: Patrick Mallon <pmallon@comcast.net> Subject: WTB - Drivers side door speaker for 98 Coupe My apologies - the car has a black interior with the H/K system Anyone out there with a spare drivers door side speaker set for a 98 M3 Coupe? Anyone know of a good place to pick one of these up used/salvaged?
-------------------- 4 --------------------
#4. Re: [E36M3] brake pads - from cteague@cox.net
Top
Date: Tue, 1 Jul 2003 16:10:26 -0400 From: <cteague@cox.net> Subject: Re: [E36M3] brake pads Bob, I got mine from StopTech, and have been very happy. Chris 97 M3/4 > > Group, > > Where is the best place to get Axxis brake pads? > > TIA, > > Bob Gill
-------------------- 5 --------------------
#5. '99 M3 FS Must Sell! - from eevans@planetc.com
Top
Date: Tue, 01 Jul 2003 17:59:29 -0400 From: eevans@planetc.com Subject: '99 M3 FS Must Sell! Distress sale! 1999 BMW M3, 87K Miles, Black on Black, rear spoiler, 5 spd., all power options, Computer has been performance programmed, new brake rotors and pads, new tires, a couple of slight blems here and there, but very nice inside and out, Car located in Knoxville, TN, garaged, non smoker, must sell this week, steal it from me for $21500. Looking for an E30 M3 track car, mileage under 120K. Evan Evans President Smoky Mountain Chapter BMW CCA 865-694-3088
-------------------- 6 --------------------
#6. Brake light circuit - from Mo Karamat
Top
Date: Tue, 01 Jul 2003 23:48:54 -0400 From: Mo Karamat <karamatm@optonline.net> Subject: Brake light circuit Dear All, I have had a strange error pop up on my on board computer.. For the past week or so, sometimes the check light comes on and "Brake Light circuit" displays on the computer. It will show up for a while, and then just disappear. The brake lights work fine when this error is displaying.. Any ideas? The car is still covered under my CPO warranty, so I could take it in, but that would be $50, if this is an easy fix, then why spend the cash.. Thanks Mo
-------------------- 7 --------------------
#7. Fault Code "FE" ? - from Spencer Fong
Top
Date: Tue, 01 Jul 2003 21:19:37 -0700 From: Spencer Fong <sk99m3@attbi.com> Subject: Fault Code "FE" ? I am getting a fault code of "FE" which my Peake describes as "EVAP large leak detected". Can someone tell me what to look for? Car runs fine. Thanks. -spencer '99 M3
-------------------- 8 --------------------
#8. RE: SS Brake Lines - from kim.burgess@att.net
Top
Date: Wed, 02 Jul 2003 04:59:48 +0000 From: kim.burgess@att.net Subject: RE: SS Brake Lines I recall a while back someone indicating where and what size shrink sleeve to obtain to add a protective shield to SS brake lines. Just received my Goodridge lines and they are bare SS braid. TIA Kim Burgess
-------------------- 9 --------------------
#9. Re: [E36M3] Fault Code "FE" ? - from Zack Steinkamp
Top
Date: Tue, 1 Jul 2003 23:42:45 -0700 (PDT) From: Zack Steinkamp <edsarkiss@yahoo.com> Subject: Re: [E36M3] Fault Code "FE" ? 9 times out of 10 it's a loose gas cap. usually, it's on crooked. -zs --- Spencer Fong <sk99m3@attbi.com> wrote: > Date: Tue, 01 Jul 2003 21:19:37 -0700 > From: Spencer Fong <sk99m3@attbi.com> > Subject: Fault Code "FE" ? > > I am getting a fault code of "FE" which my Peake > describes as "EVAP large leak detected". > > Can someone tell me what to look for? > > Car runs fine. > > Thanks. > -spencer > '99 M3 > > > > > > ************************************************* > Please help support the E36M3 list by visiting our > sponsors: > Taylor Autosport http://www.taylorautosport.com > Rogue Engineering http://www.rogueengineering.com > BMW M3 Specialties http://www.jt-designs.com > Bimmerworld http://www.bimmerworld.com > Turner Motorsport http://www.turnermotorsport.com > > DIGEST INFORMATION: > http://www.bmw-m.net/resources/digest_info.htm > ************************************************* > > > > This e-mail and any attachments may contain > confidential and > privileged information. If you are not the intended > recipient, > please notify the sender immediately by return > e-mail, delete this > e-mail and destroy any copies. Any dissemination or > use of this > information by a person other than the intended > recipient is > unauthorized and may be illegal.
-------------------- 10 --------------------
#10. Re: [E36M3] RE: SS Brake Lines - from Ben Liaw - Rogue Engineering
Top
Date: Wed, 2 Jul 2003 08:39:03 -0400 From: "Ben Liaw - Rogue Engineering" <ben@rogueengineering.com> Subject: Re: [E36M3] RE: SS Brake Lines Hey Kim, I think you may find it difficult to add heat shrink sleeve AFTER the line has been assembled, becuase you have to have tubing that is large enough to fit over the female fittings. Unless, of course, you high shring ratio tubing (4:1 vs. standard 2:1) but that's pretty expensive stuff. Try McMaster.com and search for heat shrink tubing. A 4" length of the stuff is nearly $40! Of course, you could always just get StopTech lines, which are already has the protective coating as part of their assembly process. Regards, Ben Liaw - Rogue Engineering http://www.rogueengineering.com 201-444-8150 ----- Original Message ----- From: <kim.burgess@att.net> To: "E36M3" <e36m3@bmw-m.net> Sent: Wednesday, July 02, 2003 1:08 AM Subject: [E36M3] RE: SS Brake Lines > Date: Wed, 02 Jul 2003 04:59:48 +0000 > From: kim.burgess@att.net > Subject: RE: SS Brake Lines > > I recall a while back someone indicating where and what size shrink sleeve to > obtain to add a protective shield to SS brake lines. Just received my Goodridge > lines and they are bare SS braid. > > TIA > Kim Burgess > > > ************************************************* > Please help support the E36M3 list by visiting our sponsors: > Taylor Autosport http://www.taylorautosport.com > Rogue Engineering http://www.rogueengineering.com > BMW M3 Specialties http://www.jt-designs.com > Bimmerworld http://www.bimmerworld.com > Turner Motorsport http://www.turnermotorsport.com > > DIGEST INFORMATION: > http://www.bmw-m.net/resources/digest_info.htm > ************************************************* > > > > This e-mail and any attachments may contain confidential and > privileged information. If you are not the intended recipient, > please notify the sender immediately by return e-mail, delete this > e-mail and destroy any copies. Any dissemination or use of this > information by a person other than the intended recipient is > unauthorized and may be illegal. >