E36M3 #3999

Tuesday, November 16, 2004 13:22:57

This digest contains the following messages:

#1. Yokohama AVS Intermediates $400 Shipped - from Brent Williams
#2. Re: Active suspension - from Neil Maller
#3. RE: [E36M3] Fitment of 18x9" rims with R's - from Steve Hazard
#4. Re: E36 M3 Driver's Side Halfshaft - from Shane Kleinpeter
#5. Re: Output shafts - from RonStygar@aol.com
#6. Re: [E36M3] Re: Active suspension - from Chester Wong
#7. WTB: 3.2L cams urgently - from Jim Bassett
#8. Re: [E36M3] WTB: 3.2L cams urgently - from Chester Wong
#9. Re: [E36M3] WTB: 3.2L cams urgently - from Jim Bassett
#10. Re: [E36M3] WTB: 3.2L cams urgently - from Chester Wong

-------------------- 1 --------------------

#1. Yokohama AVS Intermediates $400 Shipped - from Brent Williams
Top
Date: Tue, 16 Nov 2004 12:45:05 -0500 From: "Brent Williams" <b@bmwmpire.com> Subject: Yokohama AVS Intermediates $400 Shipped Set of 4. 235/40 Yoko AVS Tires. New. Asking 400 shipped. 407 947 1227

Reply to: Brent Williams

Top

-------------------- 2 --------------------

#2. Re: Active suspension - from Neil Maller
Top
Date: Tue, 16 Nov 2004 12:51:44 -0500 From: Neil Maller <neil.maller@gte.net> Subject: Re: Active suspension on 11/16/04 12:42 PM, "Steve Hazard" <SHazard@nhboston.com> wrote: > I'm also having a true active suspension installed in my car this off season. > The car gets measured this Friday. Each shock will have its own accelerometer, > external reservoir, and software. And the real kicker is it will be cockpit > adjustable! The intent is to bring this setup to market for LESS than some of > the existing passive suspension packages cost now.....I'm the test mule. Yeah, but will it bounce up and down at stoplights? Neil 96 M3 - "Bastard child"

Reply to: Neil Maller

Top

-------------------- 3 --------------------

#3. RE: [E36M3] Fitment of 18x9" rims with R's - from Steve Hazard
Top
Date: Tue, 16 Nov 2004 13:08:05 -0500 From: "Steve Hazard" <SHazard@nhboston.com> Subject: RE: [E36M3] Fitment of 18x9" rims with R's Ok Sherlock :-) Bizzzit, wrong guess. My guy is in in Southern NH. He's already got 4 sets of them in some rally cars, but wants to crack into the P Car and BMW aftermarket business. His design is patented, and several aftermarket suppliers are showing strong interest. Installation will be sometime in Feb, or early March I'm guessing. Steve -----Original Message----- From: Carlos.F.Lopez@jci.com [mailto:Carlos.F.Lopez@jci.com] Sent: Tuesday, November 16, 2004 12:37 PM To: Steve Hazard Cc: e36m3@bmw-m.net Subject: Re: [E36M3] Fitment of 18x9" rims with R's From: "Steve Hazard" <SHazard@nhboston.com> >I'm also having a true active suspension installed in my car this off season. The car gets measured this Friday. Each >shock will have its own accelerometer, external reservoir, and software. And the real kicker is it will be cockpit >adjustable! The intent is to bring this setup to market for LESS than some of the existing passive suspension packages >cost now.....I'm the test mule. Hmm... Steve with a Boston email address, in flight Sky magazine had Amar Bose article about active suspension in it and Bose is in Framingham area. Two and two? :-) Interesting article, it took Bose 24 years of R&D to finally come up with this product. Carlos.

Reply to: Steve Hazard

Top

-------------------- 4 --------------------

#4. Re: E36 M3 Driver's Side Halfshaft - from Shane Kleinpeter
Top
Date: Tue, 16 Nov 2004 10:16:29 -0800 (PST) From: Shane Kleinpeter <sak335@yahoo.com> Subject: Re: E36 M3 Driver's Side Halfshaft >Hehehe...I usually do a blanket statement when I >refer to '96+ =) Who has a >'96 M3 anywayz...it's a like a bastard child ;) Hmmmmmmm... Shane K. '96 M3 <--- Bastard '94 325i #335JP/#76ITS <--- Little Bastard? No, no, too James Deanish. __________________________________ Do you Yahoo!? The all-new My Yahoo! - Get yours free! http://my.yahoo.com

Reply to: Shane Kleinpeter

Top

-------------------- 5 --------------------

#5. Re: Output shafts - from RonStygar@aol.com
Top
Date: Tue, 16 Nov 2004 13:16:29 EST From: RonStygar@aol.com Subject: Re: Output shafts The Z3-M and Z3-2.8 output shafts are 27 mm. The Z3-3.0's are 38 mm.

Reply to:

Top

-------------------- 6 --------------------

#6. Re: [E36M3] Re: Active suspension - from Chester Wong
Top
Date: Tue, 16 Nov 2004 10:21:45 -0800 (PST) From: Chester Wong <chester_p_wong@yahoo.com> Subject: Re: [E36M3] Re: Active suspension --- Neil Maller <neil.maller@gte.net> wrote: > > the existing passive suspension packages cost now.....I'm the test mule. > > Yeah, but will it bounce up and down at stoplights? THAT WOULD BE SOOOO OFFF DA HOOK!!!! And here I went to get an Elise (I have since sold it) to get attention!! ....the new Orange Elise will be here in a few months!! WOOT! > Neil > 96 M3 - "Bastard child" Hehehe...are you going to keep that in your sig? ;) Chester O no...I'm not an attention whore...that's Wayne Miller! Bahahahahaha!! Phoenix yellow? C'mon...that ain't a real color. Well...it is real...real ugly! <VBG> =====

Reply to: Chester Wong

Top

-------------------- 7 --------------------

#7. WTB: 3.2L cams urgently - from Jim Bassett
Top
Date: Tue, 16 Nov 2004 11:47:05 -0700 From: Jim Bassett <jim@jimbassett.com> Subject: WTB: 3.2L cams urgently Hi all, Wondering if anyone has some 3.2l cams they are looking to sell, and can get them to me (actually, to Bill Arnold's shop) by tomorrow midday (SF Bay Area)? Trying to avoid buying new ones as part of the valve job/repair for the street car. Thanks, Jim Bassett 1998 M3/4 1993 325is #44 ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

Reply to: Jim Bassett

Top

-------------------- 8 --------------------

#8. Re: [E36M3] WTB: 3.2L cams urgently - from Chester Wong
Top
Date: Tue, 16 Nov 2004 11:04:47 -0800 (PST) From: Chester Wong <chester_p_wong@yahoo.com> Subject: Re: [E36M3] WTB: 3.2L cams urgently --- Jim Bassett <jim@jimbassett.com> wrote: > Wondering if anyone has some 3.2l cams they are looking to sell, and can get > them to me (actually, to Bill Arnold's shop) by tomorrow midday (SF Bay > Area)? > > Trying to avoid buying new ones as part of the valve job/repair for the > street > car. Why do you need to buy new ones? Chester =====

Reply to: Chester Wong

Top

-------------------- 9 --------------------

#9. Re: [E36M3] WTB: 3.2L cams urgently - from Jim Bassett
Top
Date: Tue, 16 Nov 2004 12:11:37 -0700 From: Jim Bassett <jim@jimbassett.com> Subject: Re: [E36M3] WTB: 3.2L cams urgently Quoting Chester Wong <chester_p_wong@yahoo.com>: > > Trying to avoid buying new ones as part of the valve job/repair for the > > street > > car. > > Why do you need to buy new ones? Very bad scoring on the current OE set. Jim Bassett ---------------------------------------------------------------- This message was sent using IMP, the Internet Messaging Program.

Reply to: Jim Bassett

Top

-------------------- 10 --------------------

#10. Re: [E36M3] WTB: 3.2L cams urgently - from Chester Wong
Top
Date: Tue, 16 Nov 2004 11:13:46 -0800 (PST) From: Chester Wong <chester_p_wong@yahoo.com> Subject: Re: [E36M3] WTB: 3.2L cams urgently --- Jim Bassett <jim@jimbassett.com> wrote: > > Why do you need to buy new ones? > > Very bad scoring on the current OE set. I haven't seen a set of OE ones that weren't scored on the bearing surfaces (whatever it's called). I guess yours are really bad... Good luck. Chester For $25k, I'll rip the cams out of my car and FedEx Overnight, Early AM them to wherever you want :) =====

Reply to: Chester Wong

Top