-------------------- 1 --------------------
#1. Re: 18" Wheel Fitment Question - from the_buch@telus.net
Top
Date: Sun, 20 Feb 2005 16:41:58 -0800 From: the_buch@telus.net Subject: Re: 18" Wheel Fitment Question Brian ... I run 18 X 8.5 ACS Type IIIs (39mm offset) with 7mm spacers and 245/35-18s on all four corners ... suspension is H&R OE Sports with Koni SAs ... love this setup ... apparently my wheels will not fit bigger brakes. Regards, Doug Subject: [E36M3] 18" Wheel Fitment Question Date: Sun, 20 Feb 2005 17:26:04 -0500 From: "Foley, Brian" <bfoley@cmpd.org> Subject: 18" Wheel Fitment Question Anyone know if a Breyton Vision rim in this size and width will fit an E36M3 without problems? 18x8.5 42mm offset I'm assuming a tire size of 225/40/18 all the way around... TIA Brian Foley Charlotte, NC 97 M3/4
-------------------- 2 --------------------
#2. FW: STOLEN RACE CAR AND RIG!! - from Graeme Weston-Lewis
Top
Date: Mon, 21 Feb 2005 15:53:12 -0700 From: "Graeme Weston-Lewis" <gweston@lsil.com> Subject: FW: STOLEN RACE CAR AND RIG!! Not exactly a low key rig. This was stolen in Denver, CO. If you see or hear of this rig or its equipment, please contact Dan directly. Thanks, Graeme =============================== Everyone, PLEASE HELP IFYOU CAN The AutoSport Werks Rig and the #22 Race Car have been STOLEN! Please spread the word if you see or hear about any new teams with a new 2004 Renegade 16' Toterhome with Blue suede interior and a 3 car trailer with Chrome rear lift gate. Inside was the #22 Porsche GT3 Cup Car. Also a Dynapack 4-wheel portable Dyno plus miscellaneous inventory. Please forward this email to anyone you know that may be able to spot it on the road. It was last seen at Noon on Sunday 2/20/05. The Vinyl graphics may be off off it now... The Colorado license plates for the Toter home are 916-KIG and for the trailer is 497-HMG Here are some photos of the car and rig: http://gwl.rmsolo.org/stolen/ASW%2322.jpg http://gwl.rmsolo.org/stolen/aw%20hauler1.jpg http://gwl.rmsolo.org/stolen/aw%20hauler2.jpg http://gwl.rmsolo.org/stolen/aw%20hauler3.jpg Thanks in advance for any info!! It is less than 24 hours away... Dan Aweida <mailto:dan@aweida.com> dan@aweida.com 303-263-1801 303-664-9520 Ext. 1002
-------------------- 3 --------------------
#3. FS: 1998 AA Supercharged M3/4 - from J Lee
Top
Date: Mon, 21 Feb 2005 21:35:16 -0500 (EST) From: "J Lee" <jefflee@iwon.com> Subject: FS: 1998 AA Supercharged M3/4 Its time to move onto something more practical. This is a 1998 M3 Sedan that has been supercharged by Active Autowerkes. The car is fully loaded plus many subtle mods. Go to this site to see pics, and description. http://home.comcast.net/~jlee504/1998_BMW_M3_Sedan.htm _______________________________________________
-------------------- 4 --------------------
#4. Re: [E36M3] 18" Wheel Fitment Question - from Kent L. Shephard
Top
Date: Mon, 21 Feb 2005 21:17:20 -0800 From: "Kent L. Shephard" <kents@kls-consulting.com> Subject: Re: [E36M3] 18" Wheel Fitment Question Hi, I have ATS 2-piece wheels on my car with less offset than that, but still 18x8.5. I think ET-25 is the correct offset. Mine fit with no spacers and actually on my car, I'll be going to 235 or 245 all the way around and my next tire change. Kent Foley, Brian wrote: >Date: Sun, 20 Feb 2005 17:26:04 -0500 >From: "Foley, Brian" <bfoley@cmpd.org> >Subject: 18" Wheel Fitment Question > >Anyone know if a Breyton Vision rim in this size and width will fit an E36M3 without problems? > >18x8.5 42mm offset > >I'm assuming a tire size of 225/40/18 all the way around... > >TIA > >Brian Foley >Charlotte, NC >97 M3/4 > > > > > -- "To announce that there must be no criticism of the President, or that we are to stand by the President, right or wrong, is not only unpatriotic and servile, but is morally treasonable to the American public." 1918, Theodore Roosevelt
-------------------- 5 --------------------
#5. Deflector in front of the rear wheel part # - from Richard Sperry
Top
Date: Tue, 22 Feb 2005 07:05:23 -0500 From: "Richard Sperry" <richardsperry@comcast.net> Subject: Deflector in front of the rear wheel part # Anyone know the part # for the deflectors that are in front of the rear wheels?
-------------------- 6 --------------------
#6. Re: [E36M3] Deflector in front of the rear wheel part # - from Chester Wong
Top
Date: Tue, 22 Feb 2005 04:27:14 -0800 (PST) From: Chester Wong <chester_p_wong@yahoo.com> Subject: Re: [E36M3] Deflector in front of the rear wheel part # 51 71 8 130 071/2 --- Richard Sperry <richardsperry@comcast.net> wrote: > Anyone know the part # for the deflectors that are in front of the rear > wheels? =====
-------------------- 7 --------------------
#7. Looking for E36 parts. - from genova, perry
Top
Date: Tue, 22 Feb 2005 11:48:35 -0500 From: "genova, perry" <pgenova@kospharm.com> Subject: Looking for E36 parts. I have a friend who is looking for E36 parts for his '92 325 iS. He needs a muffler and springs, shocks and bars preferably from an M3. Got any laying around that need a home? thanks Perry
-------------------- 8 --------------------
#8. new headlight and fog light bulbs ... which brand? - from Theodore Serbinski
Top
Date: Tue, 22 Feb 2005 12:08:05 -0500 From: Theodore Serbinski <stanson@gmail.com> Subject: new headlight and fog light bulbs ... which brand? Hey guys! Ok so I finally got my car back and it's looking great, running great too. And the new Bosch + DDE Plus from Umnitza are looking awesome. But now my headlight bulbs and fog light bulbs don't look as hot in comparison to the DDEs. I was wondering if any of you guys know of any great, reliable (and preferably cheap) bulbs that I can throw in their (esp for hi and low beams) to better match the DDEs. I'm thinking probably something around 6000k or so, since the DDEs seem to have a blue-ish tint to them? Or would 4500k look better? What about fog lights? Don't necessarily have to match because obviously they are fog lights and should do their job :) Any recommendations/comments are welcome! Thanks! ted
-------------------- 9 --------------------
#9. RE: [E36M3] new headlight and fog light bulbs ... which brand? - from Ty Vilhauer
Top
Date: Tue, 22 Feb 2005 10:21:13 -0700 From: "Ty Vilhauer" <quest@pacifier.com> Subject: RE: [E36M3] new headlight and fog light bulbs ... which brand? HID :) Xtec from Umnitza/Understeer -----Original Message----- From: Theodore Serbinski [mailto:stanson@gmail.com] Sent: Tuesday, February 22, 2005 10:17 AM To: E36M3 Subject: [E36M3] new headlight and fog light bulbs ... which brand? Date: Tue, 22 Feb 2005 12:08:05 -0500 From: Theodore Serbinski <stanson@gmail.com> Subject: new headlight and fog light bulbs ... which brand? Hey guys! Ok so I finally got my car back and it's looking great, running great too. And the new Bosch + DDE Plus from Umnitza are looking awesome. But now my headlight bulbs and fog light bulbs don't look as hot in comparison to the DDEs. I was wondering if any of you guys know of any great, reliable (and preferably cheap) bulbs that I can throw in their (esp for hi and low beams) to better match the DDEs. I'm thinking probably something around 6000k or so, since the DDEs seem to have a blue-ish tint to them? Or would 4500k look better? What about fog lights? Don't necessarily have to match because obviously they are fog lights and should do their job :) Any recommendations/comments are welcome! Thanks! ted ************************************************* Please help support the E36M3 list by visiting our sponsors: Bimmerworld http://www.bimmerworld.com Turner Motorsport http://www.turnermotorsport.com Eurosport High Performance http://www.eurosporthighperformance.com Rogue Engineering http://www.rogueengineering.com Treehouse Racing http://www.treehouseracing.com DIGEST INFORMATION: http://www.bmw-m.net/resources/digest_info.htm *************************************************
-------------------- 10 --------------------
#10. Re: [E36M3] new headlight and fog light bulbs ... which brand? - from Theodore Serbinski
Top
Date: Tue, 22 Feb 2005 13:16:34 -0500 From: Theodore Serbinski <stanson@gmail.com> Subject: Re: [E36M3] new headlight and fog light bulbs ... which brand? > HID :) > > Xtec from Umnitza/Understeer Are you talking about *actual* HID or close-enough bulbs? :) I think the bulbs would be the cheaper route for me now. Seems Umnitza has the Vizu and Xtec white bulbs. Do they have these bulbs for hi beams as well? Or just low? What about fogs? Same brand as well? Hmmmm. ted