-------------------- 1 --------------------
#1. Re: [E36M3] Eastern Motorworks departure....was FS: VDO gauges - from Burgess, Kim L
Top
Date: Wed, 16 May 2007 13:20:19 -0700 From: "Burgess, Kim L" <kim.l.burgess@boeing.com> Subject: Re: [E36M3] Eastern Motorworks departure....was FS: VDO gauges And....? Do keep us hanging. KLB -------------------- 9 -------------------- Date: Wed, 16 May 2007 12:57:17 -0700 (PDT) From: Chester Wong <chester_p_wong@yahoo.com> Subject: Re: [E36M3] Eastern Motorworks departure....was FS: VDO gauges I already contacted Jamie Harris (owner of Eastern Motorwerkes). Chester --- Jim Bassett <jim@jimbassett.com> wrote: > On Wed, May 16, 2007 12:45 pm, Burgess, Kim L said: > > Anyone know who EM was - phone number, address, and/or name? > > Hmmm, I may some info on the home computer from my purchase > correspondence (heck, knowing me, I may still have the actual, original, *receipt* :-)). > > I'll check when I get home tonight. > > Jim Bassett
-------------------- 2 --------------------
#2. Re: Climate Control Fix - from Burgess, Kim L
Top
Date: Wed, 16 May 2007 13:22:35 -0700 From: "Burgess, Kim L" <kim.l.burgess@boeing.com> Subject: Re: Climate Control Fix All E36 3 series are digital control 96+, as I recall. So, the simple solution is the cap R-n-R. -------------------- 10 -------------------- Date: Wed, 16 May 2007 13:03:09 -0700 From: "Scott" <stiles_s@hotmail.com> Subject: RE: [E36M3] Re: Climate Control Fix Would it be possible to somehow throw in the analog climate controls from the garden variety 3-series? The 3-dial variety? Not sure how the analog dials would interface w/our digital system, but it feels like more and more of us will be looking for a simple solution to these climate control failures. I'd be happy to move to a simple 3-dial system... Scott.
-------------------- 3 --------------------
#3. Re: [E36M3] Re: Climate Control Fix - from Kent L. Shephard
Top
Date: Wed, 16 May 2007 13:57:27 -0700 From: "Kent L. Shephard" <e36m3@kshephard.com> Subject: Re: [E36M3] Re: Climate Control Fix The cap is simple. The fix is offered from a couple of companies on the web for $50 if one is "soldering iron challenged". If you are not all thumbs, the fix takes about 30 minutes. Better than going analog. Kent On May 16, 2007, at 1:25 PM, Burgess, Kim L wrote: > Date: Wed, 16 May 2007 13:22:35 -0700 > From: "Burgess, Kim L" <kim.l.burgess@boeing.com> > Subject: Re: Climate Control Fix > > All E36 3 series are digital control 96+, as I recall. So, the simple > solution is the cap R-n-R. > -------------------- 10 -------------------- > Date: Wed, 16 May 2007 13:03:09 -0700 > From: "Scott" <stiles_s@hotmail.com> > Subject: RE: [E36M3] Re: Climate Control Fix > > Would it be possible to somehow throw in the analog climate controls > from the garden variety 3-series? The 3-dial variety? > > Not sure how the analog dials would interface w/our digital system, > but > it feels like more and more of us will be looking for a simple > solution > to these climate control failures. I'd be happy to move to a simple > 3-dial system... Scott. > > > ************************************************* > Please help support the E36M3 list by visiting our sponsors: > > Bimmerworld http://www.bimmerworld.com > Turner Motorsport http://www.turnermotorsport.com > Eurosport High Performance http://www.eurosporthighperformance.com > Rogue Engineering http://www.rogueengineering.com > Treehouse Racing http://www.treehouseracing.com > Elephant Motorsports Inc. http://www.elephantmotorsports.com > > DIGEST INFORMATION: > http://www.bmw-m.net/resources/digest_info.htm > ************************************************* > > >
-------------------- 4 --------------------
#4. A good fabricator for my E36 M3 - from John M
Top
Date: Wed, 16 May 2007 14:21:01 -0700 (PDT) From: John M <retireoncsco@yahoo.com> Subject: A good fabricator for my E36 M3 I would like to install a full cage in my 98 E36 m3, any recommendations for a fabricator in the So Cal area? Thanks John ____________________________________________________________________________________Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. http://mobile.yahoo.com/go?refer=1GNXIC
-------------------- 5 --------------------
#5. Re: [E36M3] A good fabricator for my E36 M3 - from Jim Bassett
Top
Date: Wed, 16 May 2007 14:30:52 -0700 (PDT) From: "Jim Bassett" <jim@jimbassett.com> Subject: Re: [E36M3] A good fabricator for my E36 M3 On Wed, May 16, 2007 2:25 pm, John M said: > I would like to install a full cage in my 98 E36 m3, any recommendations > for a fabricator in the So Cal area? Evosport is the first one that springs to mind. Jim Bassett
-------------------- 6 --------------------
#6. Re: [E36M3] Re: Climate Control Fix - from Robert Brooks
Top
Date: Wed, 16 May 2007 15:31:12 -0600 From: Robert Brooks <m3rb@comcast.net> Subject: Re: [E36M3] Re: Climate Control Fix I need to fix mine too. In a couple not-too-serious attempts to pop out the MFD, it didn't wanna go. The top edge will pop out easily enough, but whether I keep pushing at that point, or push it back in and alter the angle of pressure to try to make the bottom edge come loose, all that happens is the surrounding console trim starts bulging out in a scary manner--it seems like that bottom edge is securely held by something. What's the trick? >> >>
-------------------- 7 --------------------
#7. Re: [E36M3] A good fabricator for my E36 M3 - from Mark Dadgar
Top
Date: Wed, 16 May 2007 14:34:06 -0700 From: Mark Dadgar <mark@pdc-racing.net> Subject: Re: [E36M3] A good fabricator for my E36 M3 On May 16, 2007, at 2:25 PM, John M wrote: > I would like to install a full cage in my 98 E36 m3, any > recommendations for a fabricator in the So Cal area? > Bring the car north to the San Jose area and have Tony at TC Design do it. You certainly wouldn't be the first. <http://www.tcdesignfab.com> Take a look at a BMW CR or Spec Miata grid in California. You'll see a TON of Tony's work. He's an artist and reasonably priced. There are some pics of my car here: <http://www.justracing.com/galleries/thumbnails.php?album=3> - Mark ----- mark@pdc-racing.net Check out my JustRacing homepage at: http://www.justracing.com/homepage/mdadgar
-------------------- 8 --------------------
#8. RE: [e36m3] [E36M3] A good fabricator for my E36 M3 - from Marco
Top
Date: Wed, 16 May 2007 14:36:03 -0700 From: "Marco" <marco@corsa-na.com> Subject: RE: [e36m3] [E36M3] A good fabricator for my E36 M3 Evosport. Tell Brad I sent you. ;-) http://www.evosport.com/ Marco -----Original Message----- From: John M [mailto:retireoncsco@yahoo.com] Sent: Wednesday, May 16, 2007 2:25 PM To: E36M3 Subject: [e36m3] [E36M3] A good fabricator for my E36 M3 Date: Wed, 16 May 2007 14:21:01 -0700 (PDT) From: John M <retireoncsco@yahoo.com> Subject: A good fabricator for my E36 M3 I would like to install a full cage in my 98 E36 m3, any recommendations for a fabricator in the So Cal area? Thanks John ____________________________________________________________________________ ________Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. http://mobile.yahoo.com/go?refer=1GNXIC ************************************************* Please help support the E36M3 list by visiting our sponsors: Bimmerworld http://www.bimmerworld.com Turner Motorsport http://www.turnermotorsport.com Eurosport High Performance http://www.eurosporthighperformance.com Rogue Engineering http://www.rogueengineering.com Treehouse Racing http://www.treehouseracing.com Elephant Motorsports Inc. http://www.elephantmotorsports.com DIGEST INFORMATION: http://www.bmw-m.net/resources/digest_info.htm ************************************************* No virus found in this incoming message. Checked by AVG Free Edition. Version: 7.5.467 / Virus Database: 269.7.1/805 - Release Date: 5/15/2007 10:47 AM
-------------------- 9 --------------------
#9. Re: [E36M3] A good fabricator for my E36 M3 - from jeff.conner@yahoo.com
Top
Date: Wed, 16 May 2007 14:45:19 -0700 (PDT) From: jeff.conner@yahoo.com Subject: Re: [E36M3] A good fabricator for my E36 M3 "Artist" makes it sound like he's flaky and stuck-up. How about "Artisan", or something even more appropriate "Perfectionist" Tony is a great guy who does great work -jeff *lightly penciled in appointment for Tony to build a full cage in the trackdog in October... ----- Original Message ---- From: Mark Dadgar <mark@pdc-racing.net> On May 16, 2007, at 2:25 PM, John M wrote: > I would like to install a full cage in my 98 E36 m3, any > recommendations for a fabricator in the So Cal area? > Bring the car north to the San Jose area and have Tony at TC Design do it. You certainly wouldn't be the first. <http://www.tcdesignfab.com> Take a look at a BMW CR or Spec Miata grid in California. You'll see a TON of Tony's work. He's an artist and reasonably priced. ____________________________________________________________________________________Get the free Yahoo! toolbar and rest assured with the added security of spyware protection. http://new.toolbar.yahoo.com/toolbar/features/norton/index.php
-------------------- 10 --------------------
#10. Re: [E36M3] A good fabricator for my E36 M3 - from Jay Hudson
Top
Date: Wed, 16 May 2007 15:02:02 -0700 From: Jay Hudson <jwhud@budget.net> Subject: Re: [E36M3] A good fabricator for my E36 M3 <HTML> <P>Check with Evosport 714-901-3100</P> <P> </P> <P>Jay<BR> <BR> <BR> <BR> <B>On Wed May 16 14:25 , John M <RETIREONCSCO@YAHOO.COM>sent:<BR> <BR> </P></B> <BLOCKQUOTE style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #f5f5f5 2px solid; MARGIN-RIGHT: 0px">Date: Wed, 16 May 2007 14:21:01 -0700 (PDT)<BR> From: John M <<A href="javascript:top.opencompose('retireoncsco@yahoo.com','','','')">retireoncsco@yahoo.com</A>><BR> Subject: A good fabricator for my E36 M3<BR> <BR> I would like to install a full cage in my 98 E36 m3, any recommendations for a fabricator in the So Cal area?<BR> <BR> Thanks <BR> <BR> John<BR> <BR> <BR> <BR> <BR> <BR> ____________________________________________________________________________________Take the Internet to Go: Yahoo!Go puts the Internet in your pocket: mail, news, photos & more. <BR> <A href="parse.pl?redirect=http%3A%2F%2Fmobile.yahoo.com%2Fgo%3Frefer%3D1GNXIC" target=_blank><SPAN style="COLOR: #ff0000">http://mobile.yahoo..com/go\?refer=1GNXIC</SPAN></A><BR> <BR> *************************************************<BR> Please help support the E36M3 list by visiting our sponsors:<BR> <BR> Bimmerworld <A href="parse.pl?redirect=http%3A%2F%2Fwww.bimmerworld.com" target=_blank><SPAN style="COLOR: #ff0000">http://www.bimmerworld.com</SPAN></A><BR> Turner Motorsport <A href="parse.pl?redirect=http%3A%2F%2Fwww.turnermotorsport.com" target=_blank><SPAN style="COLOR: #ff0000">http://www.turnermotorsport.com</SPAN></A><BR> Eurosport High Performance <A href="parse.pl?redirect=http%3A%2F%2Fwww.eurosporthighperformance.com" target=_blank><SPAN style="COLOR: #ff0000">http://www.eurosporthighperformance.com</SPAN></A><BR> Rogue Engineering <A href="parse.pl?redirect=http%3A%2F%2Fwww.rogueengineering.com" target=_blank><SPAN style="COLOR: #ff0000">http://www.rogueengineering.com</SPAN></A><BR> Treehouse Racing <A href="parse.pl?redirect=http%3A%2F%2Fwww.treehouseracing.com" target=_blank><SPAN style="COLOR: #ff0000">http://www.treehouseracing.com</SPAN></A><BR> Elephant Motorsports Inc. <A href="parse.pl?redirect=http%3A%2F%2Fwww.elephantmotorsports.com" target=_blank><SPAN style="COLOR: #ff0000">http://www.elephantmotorsports.com</SPAN></A><BR> <BR> DIGEST INFORMATION:<BR> <A href="parse.pl?redirect=http%3A%2F%2Fwww.bmw-m.net%2Fresources%2Fdigest_info.htm" target=_blank><SPAN style="COLOR: #ff0000">http://www.bmw-m.net/resources/digest_info.htm</SPAN></A><BR> *************************************************<BR> <BR> <BR> </BLOCKQUOTE></HTML> <BR>